Truck Mounted Arrow Boards

Two mounting brackets allow the arrow board to be installed up off the truck bed. Two triangular brackets bolt to the bed and support either the 90° manual-tilt or 90° power-tilt frame, raising it 31 inches.

A pair of mounting brackets bolted to the back of the arrow board attach in a fixed position on any truck tailgate, either permanently or temporarily. Installation on the tailgate takes only a minute.

The 180-degree tilt frame allows the board to face forward or backward. The control panel, installed inside the cab, operates the arrow-board display and tilt-frame. An electric actuator tilts the frame.

The 90-degree tilt frame allows the board to face traffic, or to face downward when not in use. An electric actuator tilts the frame, controlled with a switch on the arrow-board control panel.

The auto-lock frame allows the arrow board to be tilted manually. Pulling the spring-loaded locking pin releases the board, which can be tilted 90-degrees downward when not in use. The pin automatically locks the board in position.